skip to content link

How to Move a Pool Table

A pool table is one of the heaviest pieces of furniture in any home, and most of that weight sits in a slab of slate that cracks if it flexes or drops. Knowing how to move a pool table the right way is the difference between racking up a game the week you move in and paying to replace the table. The short version: a slate table almost always has to come apart. Here is how the process works, step by step.

Find Out What Kind of Table You Have

The table’s construction decides everything that follows.

Table type Approximate total weight How it moves
Three-piece slate 600 to 1,000+ lbs Full disassembly, slate moved in sections of roughly 150 to 250 lbs each
One-piece slate 400+ lbs for the slate alone Full disassembly, slab needs extra hands or equipment
Non-slate (MDF or wood bed) A few hundred lbs Sometimes moved assembled for short distances
Outdoor table 300 to 700 lbs Varies by model, check the manual

Most home tables of 8 and 9 feet use three-piece slate. If you are not sure, the slate type becomes obvious once the felt comes off: you will see either one solid slab or seams between sections.

Why You Should Not Move It in One Piece

It is tempting to slide dollies under the legs and roll the table out whole. With slate, that is how tables get ruined. The frame is not designed to carry the slate while it flexes and tilts, and any twist can crack the slate or warp the frame. Even a move across the room is risky with a slate table. If it needs to cross a doorway, a threshold, or a staircase, take it apart.

Disassemble It in the Right Order

Before you start, take photos of every stage and keep a zip-top bag and marker for each group of hardware.

  1. Pockets – Remove the screws or staples holding each pocket.
  2. Rails – Unbolt the rails from underneath and lift them off. Number them so they go back in the same positions.
  3. Felt – If the felt is stapled, carefully remove the staples. Stapled felt can sometimes be reused. Felt glued to the slate usually tears and needs replacing.
  4. Slate – Scrape away the beeswax or putty covering the screws, then remove the screws. Lift each slate section straight up with two or three people per piece.
  5. Frame and legs – Unbolt the legs and break down the frame.

Protect the Slate Above Everything Else

The slate is the expensive part, and replacement slate is hard to source. Treat each piece carefully.

  • Wrap every section in thick moving blankets and tape them closed.
  • Carry slate on its edge, not flat, which reduces flex and makes it easier to grip.
  • Never lay slate on bare concrete or gravel, even for a minute.
  • In the truck, stand each piece on edge against the wall, padded and strapped.
  • Plan the route through the house first. Slate on stairs needs a person above and below every section.

Rails, legs, and pockets go in blankets or boxes, labeled to match your photos.

Reassemble and Level at the New Home

Reassembly is the same process in reverse: legs, frame, slate, felt, rails, pockets. Build it in its final spot so it never has to move again after the slate goes on.

Leveling is the step that makes or breaks the table, and the part of how to move a pool table that people most often underestimate. On a three-piece slate, each section has to sit level on its own and flush with the next one. That usually takes shims under the slate, then filling and smoothing the seams with beeswax before the felt goes back on. Stretching felt tight and even is a skill of its own. Many owners bring in a billiards technician for the leveling and refelting, even when they handle the heavy carrying themselves.

Make Sure the New Room Fits

Before move day, measure the room at the new home. You need clearance for players to swing a cue on every side of the table, not just room for the table itself.

Table size Suggested minimum room (standard 58″ cue)
7 ft About 12’6″ x 16′
8 ft About 13′ x 17′
9 ft About 13’6″ x 18′

A slightly smaller room can work with shorter cues, but it is better to know now than to rebuild the table in a space where every shot hits a wall.

DIY or Professional Help?

Once you know how to move a pool table, the real question is whether to do it yourself. A non-slate table moving within the same house is a manageable weekend job. A slate table moving across town is a different project, with real risk of a cracked slate, an uneven playing surface, or a back injury, which is why many owners call local movers for the heavy lifting.

If you are moving with Tidal Town Moving, tell us about the pool table when you request your quote. Share the table size, slate type if you know it, and photos of the room and the path out of the house. We will confirm how we can help and whether a billiards technician should handle the teardown and leveling. Heavy, delicate items are something our crews plan around carefully, as you can see on our piano movers page and in our guides on how to prepare a piano for a move and how to move a gun safe.

Moving the rest of the game room too? Our tips on moving large furniture without damaging your floors and packing fragile items cover the bar stools, signs, and glassware.

FAQs

How much does a pool table weigh?

A three-piece slate table usually weighs 600 to 1,000 pounds or more, with each slate section around 150 to 250 pounds. Non-slate tables weigh much less.

Can I reuse the felt after moving a pool table?

Sometimes. Stapled felt removed carefully can often be reused. Felt glued to the slate usually tears during removal and needs to be replaced.

Can I move a pool table without taking it apart?

Only non-slate tables, and only for short moves on one level. A slate table should be disassembled for any move that crosses a doorway, threshold, or staircase.